Heavy Light 2.0

Ursuit Heavy Light 2.0 is an updated model of the classical Heavy Light dry suit. New cut on the sleeves and arm pits allows better movement. The crotch seam has a new cut which even better prevents seam from abrasion. YKK Aquaseal PU zipper is light weight and therefore the suit is comfortable and flexible in use. Also the layout of the suit has a new, updated look.

The suit is made of light yet durable trilaminate, three layer fabric. Despite the lightness, its durability is of top quality. Surprisingly enough, the durability of the material comes from its lightness – the fabric “escapes” from sharp surfaces and minimizes wear and tear arizing through friction. The outer surface profile gives less friction with water, and the lightness together with the telescopic design of the suit allows the internal air to be disributed evenly. All these features together create a light and comfortable suit.

Thanks to warm neck seal and separate neoprene hood suit is comfortable in use. The face seal allows use both with half and fullface masks. Can be made with attached hood.

The front zipper allows you easily to dress the suit without outside help. The YKK Aquaseal PU zipper adjust to the user’s movements and ensures that the suit feels comfortable in use. The cover on the zipper protects the jacket from rubbing and keeps the zipper clean from sand and dirt.

High quality Si Tech inlet and outlet valves ensures that it is easy to adjust the air inside the suit. Automatic outlet valve of low profile type is provided with filter and it’s therefore easy to keep clean and other additional equipments can easily be attached. Under the inlet valve is a neopren padding that divides incoming cold air evenly inside the suit.

Inside the suit there are integrated braces and together with the crotch strap they form a telescope waist. Thanks to this telescope waist construction. the ergonomy of the suit feels like a normal cloth.

Big bellow type pockets with bungee loops inside on both thighs. Bottom and knee reinforcements are made of durable Cordura® material. 4 mm neoprene boots with partly latex surface reduce the need for extra insulation. Right sizing prevents additional air from getting into the boots, which would create buoyancy. Heel strap retainers keep the fins safely in place.

• YKK Aquaseal PU front zipper with protective zipper cover
• Seam structure: doubleside taped patented seam structure
• Material: black trilaminate 230g/m2
• Warm neck seal, latex neck seal and separate neoprene hood
• Automatic outlet valve of low profile type
• Swiveling inlet valve (INT)
• Cordura® knee and bottom reinforcementst
• 4 mm neoprene boots with partly latex surface
• Integrated braces and loops for drying
• D-rings on both sides
• Latex neck seal
• Wrist are made of latex. Bottleneck shaped with protection.
• Thigh pocket on right side with velcro tape
• Includes carrying / storage bag
• Includes inlet house, cap, zip wax, talcum bottle and repair patches

• Relief zipper
• Pee valve
• Pockets for knife, light, (other than std), compass or map pocket.
• Integrated independent air system for suit gases fitted on the thigh (argon)
• Attached gloves and / or wrist rings
• The standard boot can be replaced by a sock made of 4 mm compressed neoprene (to be used with our Tactical Trek Boots) or with the light model Tech Dry boots
• Can be made with integrated hood
• Can be made with neoprene neck seal
• The size and / or model of the boots, hood, and seals can be chosen when ordering
• The valve and hose type can be chosen to fit the coming use

NEW MADE TO MEASURE PROCESS:

Ursuit Is now using their innovative photo technology to create made to measure suits.

Here are the on how to take the photos as well as the link to and .

Please make sure to set your printer to A4 paper size while printing the floor picture. Please also not set it to “fit the page”.

Please email the control measurement form to